> Step 3 of RestoreCord setup: run guided verification setup, see exactly which permissions change, customise the message in Message Studio or post with /setup.

Source: https://restorecord.sbs/publish-verification

# Step 3: publish your verification message

This is the step members actually see. RestoreCord can pick the channel, write the message and set the permissions for you, or you can do every part by hand. Here's how both routes work and what each one changes.

[Open my dashboard](https://restorecord.com/login)[Next: go-live checklist](https://restorecord.sbs/go-live-checklist)

Short answer

Open your server in the RestoreCord dashboard and run Set up verification on the Discord Integration card. Review the proposed channel, protected channels and message, then confirm. Only View Channel is edited, only on channels you approved. To post the message without touching permissions, run /setup in Discord.

## Two routes, same result

| Route                        | Picks the channel                           | Sets permissions              | Writes the message  |
| ---------------------------- | ------------------------------------------- | ----------------------------- | ------------------- |
| Set up verification (guided) | Proposes one for you                        | Yes, View Channel only        | Generates one       |
| Configure manually instead   | You mark it in a channel tree               | Yes, on the channels you tick | Your current design |
| /setup                       | The channel you run it in, or the saved one | Never                         | Your current design |

## The guided route

1. 1Open the server in the dashboard and find the Discord Integration card.
2. 2Optionally describe the server in one line, for example: gaming community, staff channels stay private.
3. 3Review the proposal: the verification channel, the channels to protect and a preview of the message.
4. 4Regenerate with a different prompt, switch to manual selection, or confirm and apply.

Without a prompt, RestoreCord works from your channel names, categories, topics and existing overwrites. If nothing is a safe fit for verification, it proposes creating a new channel, usually `#verify`, rather than reusing your general or announcement channel.

Text Channels

rules

verify

general

media

staff-chat

mod-logs

Verification channel

Where the verify message is posted.

Public

Explicitly visible before verifying.

Protected

Hidden until the member verifies.

Unchanged

Permissions left exactly as they are.

## Exactly what gets changed

One permission: **View Channel**. Send Messages, Read Message History and everything else stay as they were.

| Role mode   | Channel type           | @everyone          | Managed role       |
| ----------- | ---------------------- | ------------------ | ------------------ |
| Give Role   | Protected              | Deny View Channel  | Allow View Channel |
| Give Role   | Public or verification | Allow View Channel | Allow View Channel |
| Remove Role | Protected              | Allow View Channel | Deny View Channel  |
| Remove Role | Public or verification | Allow View Channel | Allow View Channel |

Staff channels are never marked protected. Admin, moderator, ticket, log and role-restricted channels are left unchanged, because protecting them would hand your verified role access to them.

### The safety net

Before editing a channel, RestoreCord saves its existing overwrite as a **baseline**. If any part of the run fails, it puts those baselines back, deletes the message it posted and marks the setup **Needs attention**. Running setup again also restores channels you dropped from the selection. And when the bot isn't an Administrator, it grants itself View Channel first so it can't lock itself out halfway.

## The manual route

Pick **Configure manually instead**, mark one channel as the verification channel, tick the ones to protect and choose **Save & apply**. Protecting a category protects everything inside it. Prefer to set overwrites in Discord yourself? Use **Save without applying** so RestoreCord leaves your work alone.

## Make the message yours in Message Studio

The generated message is a Message Studio design sitting in your server's verify slot. Click **Configure** on the Verification message row to edit it: drag in embeds, fields and buttons, or ask the AI bar for changes like "make it shorter" (up to 10 AI edits per hour).

A

Aurora GatekeeperAppToday at 12:00

Welcome to {server\_name}

Verify to unlock the rest of the server. It takes about ten seconds.

Verify

Ask AI to change anything…Send

Example message texttext

```
Welcome to {server_name}! We're {member_count} strong.
Verify here to unlock every channel: {verify_url}
```

* Keep a **Verify** button or a `{verify_url}` link, or the design won't publish.
* Only link buttons plus the built-in Verify and Skip verification actions are allowed in the verify slot.
* A link-only design is sent through a webhook, so your custom name and avatar apply. Adding Skip verification makes the bot post it under its own name.
* After editing a published design, republish: the setup shows Republish required until you do.

## Using /setup from Discord

Run `/setup` to re-post the message or move it to another channel. An admin-only prompt lets you choose the configured channel or the current one. It checks the bot has View Channel, Send Messages, Embed Links and Manage Webhooks, warns you if unverified members can't see the destination, and saves the replacement before deleting the old post. It never edits permissions.

Message live? Continue to [step 4: the go-live checklist](https://restorecord.sbs/go-live-checklist). Role not set yet? Revisit [step 2](https://restorecord.sbs/connect-your-server), or return to the [four-step overview](https://restorecord.sbs/).

## Guided verification setup, start to finish

1. 1  
### Open the Discord Integration card  
Open your server in the RestoreCord dashboard and find Set up verification on the Discord Integration card.
2. 2  
### Describe the server, optionally  
Add a one-line prompt such as which channels must stay private, or leave it blank.
3. 3  
### Review the proposal  
Check the proposed verification channel, the channels to protect and the generated message. Nothing has changed yet.
4. 4  
### Apply and publish  
Confirm, and RestoreCord edits View Channel on the approved channels and posts the message.
[Read the verification channel docs](https://restorecord.com/docs/guides/setup-permissions)

## Verification message questions

### 

### 

### 

### 

## Let RestoreCord draft the plan

Run Set up verification, review every proposed change, and publish a message your members will trust.

[Get started free](https://restorecord.com/register)[View pricing](https://restorecord.com/pricing)
